Search

Tooltip
Photo by Julien Dorsaz, EPFL - CMi

Results (5)


Fabrication of aluminium airbridges for microwave interconnects on lithium niobate on Damascene silicon nitride photonic chips

Here we discuss the wafer-scale fabrication process flow of aluminium airbridges for microwave (MW) interconnects on lithium niobate on Damascene silicon nitride (LNOD) photonic chips. We also discuss the subsequent chip release procedure that preserves the bridges allowing for safe release of these delicate structures.

Version
Version 1.1
Date
1 year, 5 months ago
Lab
EPFL - LPQM
Comments
0
Viewed
1005
Downloads
385
Liked
1

On the fabrication of high-surface-area and high-aspect-ratio gold nanostructures

We highlight some stability issues in high-surface-area and high-aspect ratio gold nanostructures fabricated using inorganic adhesion layers on silica substrates. We ascribe these problems to capillary and surface effects and show the use of organic silane self-assembled monolayers to improve the long-term stability of such structures.

Version
Version 1.1
Date
2 years, 3 months ago
Lab
EPFL - NAM
Comments
0
Viewed
1381
Downloads
504
Liked
2

Electron beam lithography and pattern transfer on membrane grids for transmission electron microscopy

We describe a fabrication process for electron beam lithography (EBL) and the following pattern transfer steps on transmission electron microscope (TEM) grids. For demonstration purposes, we use commercial off-the-shelf TEM grids consisting of a thin suspended silicon nitride membrane on a silicon frame supporting substrate. For the pattern transfer, we demonstrate both an additive patterning technique with metal deposition and lift-off, and a subtractive patterning technique with reactive ion etching. This process could enable direct ...

Version
Version 1.1
Date
2 years, 5 months ago
Lab
EPFL - LPQM
Comments
0
Viewed
1637
Downloads
512
Liked
3

Transition metal dichalcogenide metamaterials with atomic precision

Here we will discuss our novel anisotropic wet-etching method that allows scalable fabrication of TMD metamaterials with atomic precision, combined with traditional nanolithography techniques.[1] We show that TMDs can be etched along certain crystallographic axes, such that the obtained edges are atomically sharp and exclusively zigzag-terminated. This allows us to fabricate interesting hexagonal nanostructures of predefined order and complexity, including a few nanometer thin nanoribbons and nanojunctions.

Version
Version 1.0
Date
2 years, 10 months ago
Lab
DTU - Quantum Light Source
Comments
0
Viewed
1397
Downloads
580
Liked
3

Fabrication of patterned silicon nitride nanomembranes at the LKB

Thin silicon nitride nanomembranes are attracting growing attention following a novel fabrication method which consists in patterning them with a phononic crystal. In engineering the vibrational mode profile, the dominant mechanisms of loss, radiation loss and intrinsic material loss, are simultaneously addressed and mitigated. The fabrication method employed by the optomechanics group at the Laboratoire Kastler Brossel is here presented, only employing basic lithography techniques and wet etching processes.

Version
Version 1.1
Date
3 years, 5 months ago
Lab
Sorbonne - Kastler-Brossel
Comments
0
Viewed
2988
Downloads
1077
Liked
3